Features of MicroCut processing machine

●Can accommodate thicknesses of 0.03 to 1.0 mm.

●In addition to high-precision cutting, simple welding is also possible by adjusting the laser output.

We respond to the ever-increasing market needs for extremely small apertures in recent years.

The latest positioning and processing technology enables processing of a minimum laser input diameter of 18μm and exit diameter of 10μm on a 30μm thick stainless steel sheet required for small-scale applications.

Examples of products that can be processed

encoder disc

filter

gear

optical pin pole

shim plate

vapor deposition mask

Utilization of digital technology

■Penetration check function Normally, the processing status is checked visually or with an inspection machine after processing, but the laser processing machine used for processing this product is equipped with a penetration check function (RTPC), so it is possible to check the processing status while processing. is possible. ■CMM You can also compare the processing measurement results using a coordinate measuring machine with CAD data.
It can also be used to measure the three-dimensional dimensions of existing parts, and use this data for mass production and prototype development.